BAT-Fire

Universal 5G-ready Fire Communicator

For System Integrators who want a versatile
fire communicator, the universal BAT-Fire is
equipped with dual Tip & Ring Dial Capture
and four programmable inputs/outputs with
dual path IP and LTE-M cellular technology,
which allows system integrators to save money,
maximize install flexibility and skip the 4G cellular sunset.

SKU: BAT-FIRE-VZ, BAT-FIRE-ATT 

Why Choose BAT-Fire

Reduce configuration time

Near-universal compatibility with FACPs with dialer-capture and point-capture.

Increase RMR

Monitor multiple auxiliary building system functions with four programmable inputs and outputs.

Minimize install complexity

Operate at either 12V or 24V and use minimal current to ensure your backup power requirements can be met.

Simplify your day

One communicator that works with all panels that use either dialer-capture or point-capture.

Meet local regulations

Can be configured to comply with any of the most recent UL & NFPA guidelines.

Maximize flexibility

Sole path cellular, IP, or dual-path communications.

Save money

Eliminate the inevitable LTE/4G sunset by installing a fire communicator that’s 5G-ready.

Reduce service hassles

Remote programming, troubleshooting and managed over-the-air firmware upgrades.

  • Key Features
  • Why BAT-Fire
  • Downloads
  • Supports 12V and 24V FACPS
  • Sole path IP and dual path cellular communications
  • Alarm capture via phone line interface or standard alarm outputs
  • CAT-M1 cellular is 5G-ready
  • Supports Contact ID reporting format
  • Trouble event detection and reporting
  • Four programmable input/output points
  • At-a-glance system status via front panel LEDs
  • Certifications: UL864 10th Edition, ULC-S559, UL
    1610, ULC-S304

For System Integrators who want a versatile fire communicator, the universal BAT-Fire is equipped with dual Tip & Ring Dial Capture and four programmable inputs/outputs with dual path IP and LTE-M cellular technology, which allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.

  • Reduce configuration time with near universal compatibility with dialer-capture and point-capture FACPs
  • Maximize flexibility with a communicator that offers both sole path cellular or IP, and dual path communications.
  • Meet local regulations with a communicator that can be configured to comply with the most recent UL & NFPA requirements.
  • Increase RMR by monitoring auxiliary building system functions with four programmable inputs and outputs
  • Simplify your day to day by using one communicator that works with all panels using dialer capture or point capture
  • Minimize install complexity by using a communicator that operates at either 12V or 24V and uses minimal current to ensure backup power requirements are met.
  • Save money by eliminating the inevitable LTE/4G sunset by installing a fire communicator that’s 5G-ready.
  • Eliminate service hassles with remote programming, troubleshooting and managed over-the-air firmware upgrades.
  • Protect your investment with the industry’s best 5 year warranty.

 

 

Product Specs:
Physical
Housing Dimensions:
8.6 x 5.8 x 2.2 in
Weight:
13.2 oz (372.9 g)
Cover Securing Screw
#6 screw (included)
Mounting Fasteners:
#6 screws and wall anchors (included)
Antenna
External (included)
Reported Indications
Cover Tamper
Inputs/Outputs
Inputs
PGM1, PGM2, PGM3, PGM4
Input Ratings
4.7k pullup to 12VDC or 24VDC
Outputs
PGM1, PGM2, PGM3, PGM4, Phone 1,
Phone 2
Output Ratings
Open collector outputs, Shunt up to 75mA into ground
Models
BAT-FIRE-VZ
BAT-Fire, Verizon™
BAT-FIRE-ATT
BAT-Fire, AT&T ™
Environmental
Operating Temperature:
32°F to 120°F (0°C to 48.9°C)
Maximum Humidity
93% non-condensing relative humidity
Electrical
Power Supply Options
FACP Regulated Supply or UL1481 Listed Power Supply such as Altronix AL300
Current Draw
154mA (Standby) 207mA (Max) @12VDC
109mA (Standby) 161mA (Max) @24VDC
Input Voltage
10V-28VDC
24hr Battery Backup Requirements
12VDC requires 3.7Ahr
24VDC requires 2.62Ahr
Communications
Cell
Yes
Ethernet
Yes
WiFi
No
Central Station Receivers
Bosch Conettix: D6600, ITS-D6686-UL, D6100IPv6
Regulatory
Certification Listings:
UL 864 10th Edition, ULC-S559, UL 1610, ULC-S304