LED-Keypad
Modern interface for Connect+ security panel
The new LED Keypad is the perfect push-button interface exclusively for the Connect+. Featuring a brilliant LED arming bar and light-up buttons, the LED Keypad is easy to read and operate. Mount it on the wall or desktop, both bases are included in the package. You can plug it into the wall for power or run on AA batteries for up to one year. The LED Keypad makes a great disarming device for the backdoor or garage and is a must-have accessory for an entry-level security system.
SKU: RE663 LED KEYPAD
What makes LED Keypad different:
Simplified controls
Easy enough for any member of the family, young or old.
Installs in seconds
Easy Bluetooth enrollment in 10 seconds or less with one button press on the Connect+.
Affordably priced
Makes a great second (or third) control for the garage or backdoor.
Easy to read
Lit buttons and LED arming bar can be immediately understood from across the room.
Convenient night mode
Dim the lights and mute the sound in do not disturb mode.
Fuse timer for exits
LED bar shows time tick down before system arms.
Key Features
- Affordable interface for price conscious customers
- Brilliant LED lights make keys easy to read in the dark
- Simple keypad can be easily understood by young and old
- Great as an extra to keep in the garage or by the back door
- Displays real-time status
- Wall or table mount
- Competitive Offering for the Pro-installer vs. Big Box DIY
Downloads
Product Specs:
| Physical | |
|---|---|
|
Wall Dimensions: |
3.81in {9.67cm] x 5.1in [12.94cm] x 1.55in [3.94cm] Deep |
|
Table-Top Footprint: |
3.81in [9.67cm] x 5.47in [13.89cm] x 3.17in [8.05cm] High |
|
Weight: |
1.0lb [454g] |
|
Pilot Hole for Screw into Wood: |
Ø 1/8in [3mm] |
|
Pilot Hole for Wall Anchor: |
Ø 3/16in [4.7mm] |
|
Mounting Fasteners: |
#6 screws & 2 wall anchors (included) |
| Device Specification | |
|---|---|
|
Frequency |
2.4 GHz |
|
Replacement Battery |
4 Panasonic AA (Alkaline) |
|
Nominal Battery Life |
1 year (under typical use) |
|
Battery Voltage |
6.0 VDC (Nominal), TBD VDC (Low) |
|
Current Draw |
TBD (Maximum), 9uA (Quiescent) |
|
Transmitted Indications |
Low Battery, Tamper, Supervision |
| Environmental | |
|---|---|
|
Operating Temperature: |
32°F to 120°F [0°C to 49°C] |
|
Maximum Humidity |
85% non-condensing relative humidity |
| Accessories |
|---|
|
No accessories needed. Connect+ has bluetooth built in, power supply included |
| Certification | |
|---|---|
|
FCC: |
U5X-RE663 |
|
IC: |
8310A-RE663 |
Accessories
Wall Plates
Have a large imperfection you need to cover? Our Wallplates are great for covering wall blemishes or finish damage caused by prior keypad installations.
- 5-pack
- Works with LED Keypad & Slimline Touchpad
- Demensions 7.75 x 6 x .25 inches
- Weight: 2.45 oz
- CP-WALLPLATE-5
