1. Home
  2. Knowledge Base
  3. Activity(LED) Lights (WiFi Devices) Board Button Configuration

LED 1 – is used for DHCP & Network connection diagnostics:

  • Solid: Indicates a connection has been made to ipDatatel. (The device is Online)
  • 3-Flashes: Indicates the device is not connected to the Internet or is not assigned an address from the router
  • 7-Flashes: Indicates the device is still working on “AP Configuration”, therefore is not connected to the WIFI Network.

LED 2 – Used to indicate keybus connectivity

LED 6 – (When not connected to a Wi-Fi Router)

  • Flashing: Indicates device is searching for a router in WPS mode.
  • Solid: Indicates the device has found a router via WPS Mode.

LEDs 3 to 6 – (When connected to a Wi-Fi Router)

  • ┬áDisplays signal strength, indicated on device startup and updated every 4 hours

Was this article helpful?