Search Results for ""

ht_kb

Connect+ CP-01 Compliance Features

<p>Connect+ added CP-01 compliance features in firmware version 0.5.11.00. The following article covers the functional changes for compliance. CP-01 compliance for false alarm reduction.  Functional changes are: Silent arming&#8230;</p>
ht_kb

Connect+ CP-01 features

<p>Connect+ added CP-01 compliance features in firmware version 5.11.00. The following article covers the functional changes for compliance. CP-01 compliance for false alarm reduction.  Functional changes are: Silent arming&#8230;</p>
ht_kb

Which routers will work BAT CDMA WIFI

<p>The following routers will with the the BAT CDMA WIFI: Will only connect via WIFI to B or G routers &nbsp; Please note the BAT CDMA WIFI is&#8230;</p>
ht_kb

Activity (LED) Lights

<p>LED 1 &#8211; is used for DHCP &amp; Network connection diagnostics: Solid: Indicates a connection has been made to ipDatatel. (The device is Online) 3-Flashes: Indicates the device is&#8230;</p>
ht_kb

Board Button Configuration

<p>1 Tap &#8211; Device will go into WPS mode and should search for nearest WPS activated Wi-Fi router in the area. 2 Taps &#8211; Device will indicate Wi-Fi signal strength [Device must&#8230;</p>
ht_kb

Product Manual

<p>For more information on this product, click here: https://alula.com/products/cloud-services/</p>
ht_kb

Benefits

<p>Cost Effective: Why purchase expensive hardware storage, especially if there are multiple sites that need surveillance. Easily manage all camera from one platform. Easy to Use: Built for&#8230;</p>
ht_kb

Features

<p>Watch live video and view multiple cameras simultaneously View and manage recorded media with the timeline viewer Receive alerts when motion is detected Control motion detection and camera&#8230;</p>
ht_kb

To a BAT-CDMA/WIFI/LTE

<p>Terminal 1(TIP) should be wired to Tip on the alarm panel (used for communication) Terminal 2(RING) should be wired to Ring on the alarm panel (used for communication)&#8230;</p>
ht_kb

To A BAT-CDMA-L

<p>Terminal 1(RING) should be wired to Ring on the panel (used for communication) Terminal 2(TIP) should be wired to Tip on the panel (used for communication) Terminal 3(NEG&#8230;</p>